Mission: Provide the automation Hardware and Software solution which drives/manages the automation present at production site. Configures tests, installs and manages the project, follow-up documents relate to all activities including the production ramp-up along with technical support of existing deployed solutions.
Produce Complete and Complex automation system per standard of Automation and Electrical Engineering in order to propose best valued solution respecting the functional specification and the best cost/performance ratio.
Produce Set Up/Installation/Commissioning Instructions.
Know how to configure and start individual automation components and program the system.
Design a complete Automation system architecture
Can and able to configure and start automation system – component, controller, drive, network, and interface with Level 2 – supervisory system.
Create/Edit/Modify of PLC Program autonomously
Create/Edit/Modify of HMI Program autonomously
Performed a Risk Safety Analysis during design, install and commissioning.
Conduct Design review with Expert to demonstrate the robustness and optimization of proposed solution
Configure a PID of a servo loop for feedback control system
Configure and implement Level 1 control system integrated with Level 2 supervisory system.
Able to do cycle simulation and offline programming i.e. robot
Design and validate the Ethernet network security deployed on system with expert
Able to configure and start a slave system, motion, non-speed regulation with the main system.
Education: Associates degree in Electrical Engineering; BSEE; BSEET
Experience in Project Deployment
Design and Commission Rockwell Controller and/or Siemens Controller and HMI autonomously
Design advance automation architecture for machines involving Motion, HMI, network, etc.
Know and able to utilize add-on Instruction for program efficiency
Perform equipment automation incorporating strong Operator and Maintenance inputs
Able to configure and tune Drive with Software: Rockwell or Control Technique (NIDEC), Siemens, Festo, etc.
Able to troubleshoot and modify Level 1 System that integrated with Level 2 Supervisory System
Commissioning and ramp up of Main system and slave system
Strong commitment/engagement to the objectives (planning and quality)
Dynamic individual with many technical solutions/proposals
Occasional travel to sites and remote support when required
Able to communicate professionally to peer and management
All your information will be kept confidential according to EEO guidelines.
